PMO Tank Outlet Curd Double Seat Mix Proof Valves - W75CP Series

W75CP PMO Mix Proof Valves are for safe separation of product from CIP plus single seat-lift separation compliance. Fully independent operation and cleaning of either the upper or lower housing is achieved
due to:

• PMO Section 15p(B) compliance for single seat lift separation while product is in the opposite housing
  
• PMO Section 12p compliance for ability to clean all product
  contact surfaces

Features and Benefits:

• Safe and easy to maintain
  
• Robust machine-from-bar design
  
• Minimum leakage during transition due to radial seal design
  
• Reliable full-featured control tops
  
• Independent seat-lifting
  
• Both stems detectable

Materials

• Product Wetted: ASTM 316L (UNS-S31603); (DIN-1.4404)
• Non-Product: ASTM 304 (UNS-S30400); (DIN-1.4301)
• Seat: Tri-Ring Compression Seal Upper Stem, Radial Seal Lower Stem
• Elastomers: EPDM or FKM (Fluoroelastomer)
• Finish: ≤ 32 Ra (≤0.8 μm) Other finishes available upon request.

Pressure Ratings:

Operating pressure:

• 3" O.D. Tube = 150 psig (10.3 bar)
• 4" O.D. Tube = 90 psig (6.2 bar)
• 6" O.D. Tube = 90 psig (6.2 bar)

Other W75 Valves:

• W75 PMO Double Seat Mix Proof Valves
• W75RS PMO Double Seat Mix Proof Valves
• W75CP PMO Continuous Process Double Seat Mix Proof Valves

3D Single Seat and Mix Proof Valve Drawings

• 60 Series and 70 Series, upper and lower bodies and accessory Drawings

2D Single Seat and Mix Proof Valve Drawings

• 2D 60 Series and 70 Series Drawings

Product Literature:

• DS-1226 W75CP Mix Proof Tank Outlet Curd Valve

• DS-1222 W75 Series Valves
  

• FH-1872 - W75CP PMO Double-Seat Mix Proof Valve for Continuous Processing
  
  
• 95-03076 W75RS PMO Mix Proof Valve Manual
  
  
• 95-03094 W75CP PMO Mix Proof Valve Manual
  
  
• FDA Compliance Letter
  
  
• Clean Bill of Health for Mix Proof Valve - white paper

Patent Pending